Liquid Back Volume Regulator

Overview

Liquid Back Volume Regulator (StructureBackLiquidPressureRegulator) in Stationeers: device, hash 2099900163, 100 W. With build steps, 11 IC10 logic values…

There is no written explanation for this entry yet. All values below come straight from the game.

IC10 and logic

11 logic values, 11 readable and 3 writable.

Power R 1
Error R 4
Lock RW 10
Setting RW 12
Maximum R 23
Ratio R 24
On RW 28
RequiredPower R 33
PrefabHash R 84
ReferenceId R 217
NameHash R 268

Example: address by name

Reads Setting, shows the value on the IC housing and writes On. Name the device with the labeller first; devices with the same name are addressed together.

# Liquid Back Volume Regulator address by name
define DEVICE 2099900163  # StructureBackLiquidPressureRegulator
define NAME HASH("Liquid Back Volume Regulator")  # name in game (labeller)
define TARGET 1  # On 1 = on
alias value r0

start:
yield
lbn value DEVICE NAME Setting 0  # 0 = average of all with this name
bnan value start  # no device with this name
s db Setting value  # show on the housing
sbn DEVICE NAME On TARGET  # set value
j start

Academy: devices by name Academy: batch modes IC10 academy IC10 editor

Connections

Schematic: inputs left, outputs right, waste on top, power and data at the bottom. Position and spacing do not match the model.

1Liquid pipe · input
2Liquid pipe · output
3Power and data

Building and deconstruction

Grid: small grid (0.5 m) · mounting: free in the grid

1
Place
- Kit (Liquid Regulator)
Take back with Hand Drill

Total material

Kit (Liquid Regulator)

Deconstruction returns

Kit (Liquid Regulator)

Built with: Kit (Liquid Regulator)

Raw values from the game code (6)

Field names as in the game code, untranslated. Useful for mods and exact limits.

`VolumeRegulator.RegulatorType`	Downstream
`DeviceAtmospherics.outputSetting`	50
`DeviceAtmospherics.pressurePerTick`	101.3
`DeviceAtmospherics.MinSetting`	0
`DeviceAtmospherics.MaxSetting`	100
`DeviceAtmospherics.ConnectionType`	Exhaustive