LArRE Dock (Bypass)

Overview

LArRE Dock (Bypass) (StructureLarreDockBypass) in Stationeers: device, hash 1011275082, 10 W. With build steps, 7 IC10 logic values and connection diagram.

There is no written explanation for this entry yet. All values below come straight from the game.

IC10 and logic

7 logic values, 7 readable and 2 writable.

Power R 1
Open RW 2
On RW 28
RequiredPower R 33
PrefabHash R 84
ReferenceId R 217
NameHash R 268

Example: address by name

Reads Open, shows the value on the IC housing and writes On. Name the device with the labeller first; devices with the same name are addressed together.

# LArRE Dock (Bypass) address by name
define DEVICE 1011275082  # StructureLarreDockBypass
define NAME HASH("LArRE Dock (Bypass)")  # name in game (labeller)
define TARGET 1  # On 1 = on
alias value r0

start:
yield
lbn value DEVICE NAME Open 0  # 0 = average of all with this name
bnan value start  # no device with this name
s db Setting value  # show on the housing
sbn DEVICE NAME On TARGET  # set value
j start

Academy: devices by name Academy: batch modes IC10 academy IC10 editor

Connections

Schematic: inputs left, outputs right, waste on top, power and data at the bottom. Position and spacing do not match the model.

1Robotic arm rail
2Robotic arm rail
3Power and data

Building and deconstruction

Grid: small grid (0.5 m) · mounting: free in the grid

1
Place
- Kit (LArRE Dock Bypass)
Take back with Hand Drill
2
Build stage 2
- Tool Screwdriver
- Electronic Parts ×2
Take back with Hand Drill

Total material

Deconstruction returns

Built with: Kit (LArRE Dock Bypass)

Raw values from the game code (1)

Field names as in the game code, untranslated. Useful for mods and exact limits.

RoboticArmRailDeviceBase.ConnectionType FlatExhaustive