Power Pylon Input – Stationeers Wiki

Overview

Power Pylon Input (StructurePowerPylonInput) in Stationeers: device, hash 2089507482, 10 W. With build steps, 10 IC10 logic values and connection diagram.

There is no written explanation for this entry yet. All values below come straight from the game.

IC10 and logic

10 logic values, 10 readable and 4 writable.

Power R 1
Open RW 2
Mode RW 3
Error R 4
Lock RW 10
On RW 28
RequiredPower R 33
PrefabHash R 84
ReferenceId R 217
NameHash R 268

Example: address by name

Reads Open, shows the value on the IC housing and writes On. Name the device with the labeller first; devices with the same name are addressed together.

# Power Pylon Input address by name
define DEVICE 2089507482  # StructurePowerPylonInput
define NAME HASH("Power Pylon Input")  # name in game (labeller)
define TARGET 1  # On 1 = on
alias value r0

start:
yield
lbn value DEVICE NAME Open 0  # 0 = average of all with this name
bnan value start  # no device with this name
s db Setting value  # show on the housing
sbn DEVICE NAME On TARGET  # set value
j start

Academy: devices by name Academy: batch modes IC10 academy IC10 editor

Connections

Schematic: inputs left, outputs right, waste on top, power and data at the bottom. Position and spacing do not match the model.

1Data
2Power · input

Slots and modes

Modes: 0 = Mode0, 1 = Mode1

Building and deconstruction

Grid: small grid (0.5 m) · mounting: free in the grid

1
Place
- Kit (Power Pylon)
Take back with Hand Drill

Total material

Kit (Power Pylon)

Deconstruction returns

Kit (Power Pylon)

Raw values from the game code (2)

Field names as in the game code, untranslated. Useful for mods and exact limits.

`PowerPylonTerminus.PowerMaximum`	4,900
`ElectricalInputOutput.ConnectionType`	FlatExhaustive