Shower (Powered)

Overview

Shower (Powered) (StructureShowerPowered) in Stationeers: device, hash -1081797501, 10 W. With build steps, 8 IC10 logic values and connection diagram.

There is no written explanation for this entry yet. All values below come straight from the game.

IC10 and logic

8 logic values, 8 readable and 2 writable.

Power R 1
Open RW 2
Error R 4
On RW 28
RequiredPower R 33
PrefabHash R 84
ReferenceId R 217
NameHash R 268

Example: address by name

Reads Open, shows the value on the IC housing and writes On. Name the device with the labeller first; devices with the same name are addressed together.

# Shower (Powered) address by name
define DEVICE -1081797501  # StructureShowerPowered
define NAME HASH("Shower (Powered)")  # name in game (labeller)
define TARGET 1  # On 1 = on
alias value r0

start:
yield
lbn value DEVICE NAME Open 0  # 0 = average of all with this name
bnan value start  # no device with this name
s db Setting value  # show on the housing
sbn DEVICE NAME On TARGET  # set value
j start

Academy: devices by name Academy: batch modes IC10 academy IC10 editor

Connections

Schematic: inputs left, outputs right, waste on top, power and data at the bottom. Position and spacing do not match the model.

1Data
2Liquid pipe · input
3Liquid pipe · output
4Power

Building and deconstruction

Grid: large grid (2 m) · mounting: free in the grid

1
Place
- Kit (Shower)
Take back with Hand Drill
2
Build stage 2
- Tool Screwdriver
- Kit (Liquid Pipe)
Take back with Wrench

Total material

Deconstruction returns

Built with: Kit (Shower)

Raw values from the game code (5)

Field names as in the game code, untranslated. Useful for mods and exact limits.

`DeviceAtmospherics.outputSetting`	5
`DeviceAtmospherics.pressurePerTick`	101.3
`DeviceAtmospherics.MinSetting`	0
`DeviceAtmospherics.MaxSetting`	10
`DeviceAtmospherics.ConnectionType`	FlatExhaustive