Pipe Igniter

Overview

Pipe Igniter (StructurePipeIgniter) in Stationeers: device, hash 1286441942, 5 W. With build steps, 7 IC10 logic values and connection diagram.

There is no written explanation for this entry yet. All values below come straight from the game.

IC10 and logic

7 logic values, 7 readable and 1 writable.

Power R 1
Error R 4
Activate RW 9
RequiredPower R 33
PrefabHash R 84
ReferenceId R 217
NameHash R 268

Example: address by name

Reads Activate, shows the value on the IC housing and writes Activate. Name the device with the labeller first; devices with the same name are addressed together.

# Pipe Igniter address by name
define DEVICE 1286441942  # StructurePipeIgniter
define NAME HASH("Pipe Igniter")  # name in game (labeller)
define TARGET 1  # Activate 1 = activate
alias value r0

start:
yield
lbn value DEVICE NAME Activate 0  # 0 = average of all with this name
bnan value start  # no device with this name
s db Setting value  # show on the housing
sbn DEVICE NAME Activate TARGET  # set value
j start

Academy: devices by name Academy: batch modes IC10 academy IC10 editor

Connections

Schematic: inputs left, outputs right, waste on top, power and data at the bottom. Position and spacing do not match the model.

1Power and data

Building and deconstruction

Grid: small grid (0.5 m) · mounting: free in the grid

1
Place
- Kit (Pipe Igniter)
Take back with Hand Drill

Total material

Kit (Pipe Igniter)

Deconstruction returns

Kit (Pipe Igniter)

Built with: Kit (Pipe Igniter)

Raw values from the game code (2)

Field names as in the game code, untranslated. Useful for mods and exact limits.

`DevicePipeMounted.contentType`	All
`DevicePipeMounted.ConnectionType`	FaceAllAll4