v1.2.0
Climate
Air Conditioning
A split air conditioner, air conditioners rated at 3, 6 and 12 kW, a wall heater with blower and ventilation ducts: proper room cooling, heating and ventilation.
Climate
Pipe Cooler
The counterpart of the pipe heater: cools gas and liquid right in the pipe.
v1.0.0
Server + client
Stable
Stationeers 0.2.6428.27798
Cool gas and liquid in the pipe, without an air conditioner or heat exchanger tinkering. The pipe cooler sits on a straight pipe like the pipe heater and is a small heat pump with a finned radiator. Two devices: Pipe Cooler (Gas) and Pipe Cooler (Liquid), with custom 3D models, a five-page display, LEDs, spinning fans and full IC10 control.
How it works
- Removes up to 1000 W from the pipe network, as much as the pipe heater heats.
- The removed heat plus the power it uses go to the air at the device, about 2000 W at full power. Nothing disappears.
- Power: 10 W idle, up to 1000 W while cooling, less at part load.
- If the pipe is colder than the outside air, the output drops, to 10 % at a 150 K difference.
Outside pressure rule: the radiator needs air. Below 6.3 kPa outside pressure the cooler stops and the NO AIR LED lights up. In vacuum it does not cool.
Controls
- Thermostat: cools to the target temperature (default 20 °C) and starts again 0.5 K above it.
- Control panel on top of the device: main switch, SET - and + buttons, large five-page display, LEDs.
- Power on the left, data on the right, on the sides at pipe height like the pipe heater.
The pipe cooler is fireproof, on Venus too. The kit comes from the hydraulic pipe bender, tier 1. All model labels, displays and device names appear in German or English, depending on the game language. The server and all players need the mod. Whole rooms are cooled by Air Conditioning.
Full guide: Pipe Cooler in the wiki
What it does
- Two devices: pipe coolers for gas pipes and for liquid pipes.
- Up to 1000 W of cooling, as much as the pipe heater heats.
- Thermostat with adjustable target temperature (default 20 °C).
- Works with outside air from 6.3 kPa and releases the heat to the air.
- Control panel on top with a large five-page display, LEDs and spinning fans.
- Fireproof, on Venus too.
- Model labels in German or English depending on the game language.
- Full IC10 control and a console command for an overview.
Version history
-
v1.0.0Oct 8, 2026
First release: Pipe Cooler (Gas) and Pipe Cooler (Liquid) with custom models, thermostat, outside pressure rule, five-page display, IC10 and the console command kuehler.
Frequently asked
The pipe cooler shows NO AIR and does not cool.
Its radiator releases the heat to the air and needs at least 6.3 kPa of outside pressure for that. In vacuum it does not cool. Put it in a room with an atmosphere or outside on a planet with air. The limit can be changed with MinAussendruckKPa in the settings.
Why does the room with my pipe cooler get warmer?
The heat does not disappear. The cooler releases the removed heat plus its power to the air at the device, about 2000 W at full power. In a closed room it therefore heats the room. Put the cooler outside or cool the room with Air Conditioning.
More mods
v1.0.1
Climate
Square & Cylinder Tanks
24 square and cylinder tanks for gas and liquid in S, M and L, also insulated – with a pressure gauge, display, sight glass and status LED that need no power.
v1.0.0
Power
Substation
Transformers from 10 kW to 1 GW with losses, temperature and protection, grid stabiliser, switchgear with a live network diagram and distribution boxes with load shedding.