Air Conditioning
A split air conditioner, air conditioners rated at 3, 6 and 12 kW, a wall heater with blower and ventilation ducts: proper room cooling, heating and ventilation.
We are currently experiencing issues with email delivery; this is being resolved as quickly as possible.
Climate
24 square and cylinder tanks for gas and liquid in S, M and L, also insulated – with a pressure gauge, display, sight glass and status LED that need no power.

Tanks you can read while walking past: 24 tanks, square or cylinder, for gas or liquid, in S, M and L, each also insulated. A built-in panel at eye level holds a pressure gauge, display and status LED, liquid tanks also have a sight glass. The panel needs no power.
Sizes
Display: the gauge shows 1 kPa to 100 MPa on a logarithmic scale, the red zone starts at 80 % of the burst pressure. Clicking the display turns through three pages: values, contents with the three most common substances, and tank data. The LED turns orange from 80 % pressure load and flashes red when the tank is about to burst.
Like the game: the tanks equalise with the pipe network and burst at the same pressure as the game tanks, 60.8 MPa for gas and 6.08 MPa for liquid. Pipe and data connection sit at the front on the floor. Four kits from the Hydraulic Pipe Bender, the mouse wheel picks the size, C + mouse wheel turns it. Since 1.0.1 the shell can be painted with the spray can or spray gun, metallic colours included.
IC10 like the game tank, plus fill level, pressure load and display page, console command tanks. Labels, display and device names appear in German or English, depending on the game language. The server and all players need the mod.
Full guide: Tanks in the wiki
Tanks can now be painted with the spray can and spray gun – the shell takes any game colour, metallic ones too; the colour is saved and synced in multiplayer. Display, LED and labels stay unchanged. Turn while building with C + mouse wheel. Old saves load unchanged (unpainted).
First release: 24 tanks (square and cylinder, gas and liquid, S, M and L, normal and insulated) with pressure gauge, display, sight glass and status LED, IC10 and the console command tanks.
The LED already warns from 95 % fill. Once the whole volume is liquid, the pressure in the tank jumps, and from a 6.08 MPa difference to the surroundings it takes damage and bursts – like the game's liquid tank. The LED also turns orange from 80 % pressure load; on gas tanks that is the only warning. Fill less or put a pressure regulator in front of the tank. Flashing red means: lower the pressure at once. More in the guide.
Each of the 24 shapes has its own prefab hash, tanks types in the console lists them all, and the table is also in the guide. The data cable goes to the green connection one cell to the right of the pipe. You can read everything as on the game tank, so Pressure, Temperature, TotalMoles and the gas ratios, plus Ratio (fill level), Stress (pressure load in %), Maximum (burst pressure) and Error (warning). Mode sets the display page.
Yes, since version 1.0.1. Use the spray can or spray gun on the tank – the shell takes any game colour, metallic ones too. Display, LED, band and type plate stay as they are, so you still tell gas and liquid tanks apart at a glance. The colour is saved and synced to everyone in multiplayer. Tanks from older saves stay unpainted until you paint them.
A split air conditioner, air conditioners rated at 3, 6 and 12 kW, a wall heater with blower and ventilation ducts: proper room cooling, heating and ventilation.
Transformers from 10 kW to 1 GW with losses, temperature and protection, grid stabiliser, switchgear with a live network diagram and distribution boxes with load shedding.