Overview
Power Control (CircuitboardPowerControl) in Stationeers: electronic part, hash -1923778429. With recipe.
The power control goes into the circuit board slot of a Console. According to the game data its control button is an on/off switch (OnOff): with it you switch the devices linked to the board on or off together.
That is useful as a main switch for a group. An example: the console in the corridor switches a Transformer (Large) that feeds the whole workshop branch. One press, and printers and furnaces are off the grid – for instance when the battery gets low at night.
The board does nothing automatically. If a group should go and come depending on the battery level, a chip is the better choice: it reads the batteries' Ratio and switches the transformers' On with a hysteresis. The ready program is in Backup power and load shedding: separating networks, priorities, IC10.
Remember that the console itself needs power too (50 W). If it sits on the same network as the consumers, it switches off with them when power runs short – an area power control with a cell in front keeps it alive.
The board is made in the Electronics Printer:
Manufacturing
Material, fire and recycling
Recycler returns: 2.5 Gold, 2.5 Copper
Flammable according to game data: flash point 393.2 K (120 °C); Autoignition 573.2 K (300 °C); burn time 15 s
Raw values from the game code (1)
Field names as in the game code, untranslated. Useful for mods and exact limits.
Circuitboard.ButtonMode | OnOff |