Overview
Large Extendable Radiator (StructureLargeExtendableRadiator) in Stationeers: device, hash -566775170, 10 W. With build steps, 43 IC10 logic values and…
The large extendable radiator takes up 3 × 11 × 3 spots on the small grid, about 1.5 × 5.4 × 1.5 m. Unlike the medium radiators it hangs on a liquid loop – input and output are liquid pipes. It also has a data port; it needs no power. With radiation 73.6 and convection 0.74 it is a device for vacuum and for large amounts of heat.
What the logic values do according to the game code:
Open: it only exchanges heat when extended. Retracted, radiation, convection and solar heating are zero. In return, retracting protects it from storms: it only takes weather damage while extended.Horizontal: turns the panel about the vertical axis, 0 to 360 degrees. By hand you do it with the wrench, 10 degrees per click, holding the key for small increments 1 degree. This model has no tilt (Vertical).
The sun works against you. The game checks how directly the sun falls on either side of the panel and how much of it is blocked – at five measuring points, 20 % each. The more sun, the more it heats the panel. As long as the surroundings are colder than the contents, radiation also drops: in shade the full 73.6 count, in full sun only about 46. So for cooling, turn it edge-on to the sun or put it in the shade. When you look at it, it shows its solar heating value in percent and its condition.
Readable are Temperature, Pressure, the fractions inside (200 litres) plus EnergyRadiated and EnergyConvected. At 72 J per mole and kelvin a litre of water stores about 4,000 J per kelvin – that is why it runs on liquid.
It is built in three steps:
- place the Kit (Large Extendable Radiator),
- attach two steel sheets with the welding torch,
- insert five stellite glass sheets – this stage is removed with the crowbar.
How liquid loops are planned is covered in Heat exchangers and heat transport: pipe to pipe, gas to liquid.
IC10 and logic
43 logic values, 43 readable and 4 writable.
-
OpenRW 2 -
PressureR 5 -
TemperatureR 6 -
LockRW 10 -
SettingRW 12 -
RatioOxygenR 14 -
RatioCarbonDioxideR 15 -
RatioNitrogenR 16 -
RatioPollutantR 17 -
RatioMethaneR 18 -
RatioWaterR 19 -
HorizontalRW 20 -
MaximumR 23 -
RatioR 24 -
TotalMolesR 66 -
RatioNitrousOxideR 83 -
PrefabHashR 84 -
CombustionR 98 -
RatioLiquidNitrogenR 177 -
RatioLiquidOxygenR 183 -
RatioLiquidMethaneR 188 -
RatioSteamR 193 -
RatioLiquidCarbonDioxideR 199 -
RatioLiquidPollutantR 204 -
RatioLiquidNitrousOxideR 209 -
ReferenceIdR 217 -
RatioHydrogenR 252 -
RatioLiquidHydrogenR 253 -
RatioPollutedWaterR 254 -
NameHashR 268 -
RatioHydrazineR 283 -
RatioLiquidHydrazineR 284 -
RatioLiquidAlcoholR 285 -
RatioHeliumR 286 -
RatioLiquidSodiumChlorideR 287 -
RatioSilanolR 288 -
RatioLiquidSilanolR 289 -
RatioHydrochloricAcidR 290 -
RatioLiquidHydrochloricAcidR 291 -
RatioOzoneR 292 -
RatioLiquidOzoneR 293 -
EnergyConvectedR 354 -
EnergyRadiatedR 355
Example: address by name
Reads Temperature, shows the value on the IC housing and writes Setting. Name the device with the labeller first; devices with the same name are addressed together.
# Large Extendable Radiator address by name
define DEVICE -566775170 # StructureLargeExtendableRadiator
define NAME HASH("Large Extendable Radiator") # name in game (labeller)
define TARGET 50 # Setting target value (Setting)
alias value r0
start:
yield
lbn value DEVICE NAME Temperature 0 # 0 = average of all with this name
bnan value start # no device with this name
s db Setting value # show on the housing
sbn DEVICE NAME Setting TARGET # set value
j startAcademy: devices by name Academy: batch modes IC10 academy IC10 editor
Connections
- 1Data
- 2Liquid pipe · input
- 3Liquid pipe · output
Building and deconstruction
Grid: small grid (0.5 m) · mounting: free in the grid
- 1
- 2
- 3
Total material
Deconstruction returns
Built with: Kit (Large Extendable Radiator)
Material, fire and recycling
Heat exchange (factor × surface): radiation 73.56, convection 0.736, sun 0
Raw values from the game code (7)
Field names as in the game code, untranslated. Useful for mods and exact limits.
LargeExtendableRadiator._solarRadiationRetardationDenominator | 4 |
Radiator.volume | 200 |
DeviceAtmospherics.outputSetting | 50 |
DeviceAtmospherics.pressurePerTick | 101.3 |
DeviceAtmospherics.MinSetting | 0 |
DeviceAtmospherics.MaxSetting | 100 |
DeviceAtmospherics.ConnectionType | Exhaustive |
See also
- Heat exchangers and heat transport: pipe to pipe, gas to liquidHow heat passes between two loops without the substances mixing, why liquid carries so much more heat and how to finally get rid of it to the surroundings.